Host Altitude: 8,600ft MSL at 29.92
Traffic Range and Relative Altitude: 5nm at 700 ft above
Traffic Range and MSL Altitude: 5nm at 9,300ft MSL
Low or High Voltage Condition
Voltage Indication
Host Altitude: 8,600ft MSL at 29.92 |
|
| When there is no traffic indicated, the ATD-300 reverts to indicate the onboard transmitted transponder altitude. This is the actual data received by ATC. If there is no Mode C altitude data transmitted, the ATD-300 indicates the transponder Mode A code. |
Traffic Range and Relative Altitude: 5nm at 700 ft above |
|
| When there is traffic within 5nm and ±1000ft, the ATD-300 will automatically switch to the traffic display mode. If the traffic has no Mode C altitude data, the ATD-300 indicates range only. |
Traffic Range and MSL Altitude: 5nm at 9,300ft MSL |
|
| When the left switch is set to MUTE it is possible to see all surrounding traffic within 5nm up to 30,700ft MSL. The ATD-300 will also revert to this display mode when there is no host altitude available. If the traffic has no Mode C altitude data, the ATD-300 indicates range only. |
Low or High Voltage Condition |
|
|
| Whenever there is a low or high voltage condition on the bus, the ATD-300 will alert visually and by voice of this condition. This function is activated after engine start and runs on all the time in the background. It has priority over other display modes. |
Voltage Indication |
|
| When there is no host transponder or traffic data the ATD-300 reverts to indicate bus voltage. This is normally shown during power up and taxing. |
Monroy Aerospace Corp., P.O. Box 8217, Coral Springs, FL 33075 USA
Tel. +1-954-294-9006 Fax +1-954-344-5269